• 25 kg YurtKim Ceramic Adhesive is poured onto 5,5-6,5 liters of clean water and mixed with a low-speed mixer until no lumps remain. The prepared mortar is rested for 5 minutes to mature and is used again after mixing for 1-2 minutes. 

    • The mortar is applied to the entire surface in circular movements with a combed trowel, which is selected according to the size of the ceramic and the structure of the surface.

    • For surfaces and ceramics with high water absorption, Ceramic Adhesive should be applied to the back of the coating material to achieve double-sided bonding.

    • During the application, it should be ensured that YurtKim Ceramic Adhesive does not form crusting on the surface; if such crusting has occurred, that part should be combed again, and if there is excessive drying in the mortar, it should be scraped from the surface and reapplied.

    • The coating material is placed on the surface by adjusting the joint gaps.

    • By tapping lightly with a rubber-tipped mallet, the coating material is placed on the surface.

    • Joint filling process should be initiated at least 24 hours after bonding.